Product Description Description: Beaver 250Kg and 500Kg 3S Lever Block are designed for small to medium size lifting and pulling applications. The design combines strength and compact design into one, to provide a high quality and versatile Lever Block. The load chain is made of high resistance Grade 80 zinc plated finish, calibrated and marked according to ISO 3077 and ISO 1834 Every Beaver 3S industrial level block is operationally tested to its rated capacity and is supplied with a test certificate, relating to its stamped identification side plate. This lever block complies to AS 1418.2 and approved Colour Coded to Match International Lifting Standard Features: Load chain made from high resistance, Grade 80 zinc plated fi nish, calibrated and marked according to international standards ISO 3077 and ISO 1834 The short arm lever and the gears ration allows minimum effort to raise maximum load with maximum security Top and bottom hook are complete with cast latches Top and bottom hooks are fitted with ball bearings to allow rotation under load Compact design to allow minimum headroom Beaver 3S lever blocks are operationally tested to its rated capacity and its supplied with a Beaver test certificate, relating to its stamped identification side plate Beaver repair and testing facilities are to NATA specification Applications: Lifting Lowering Fastening Pulling Approved Standards: Complies to AS/NZS 1418.2 Specifications: Product Code 506025 Rated Capacity 0.25t Colour Code Grey Standard Lift 1.5m Testing Load 4.9kN Effort on Lever to Lift Full Load 210N No. Load Chain Fails 1 Load Chain Diameter 4mm Dimensions: A 87mm B 55.5mm C 68mm D 145mm E 21mm H 200mm Net Weight 1.5kg UPC: 9322297079516 Enquiry Tell A Friend